Install Guide Part 3

Hardware Installation Guide Cable Crimping
02030311-05 Airspan Networks Ltd. B-3
The major features of the crimper are described in the following table:
Table B-1: Main features of crimping tool
Tool feature Function
Terminating Head Guides and supports the connector.
Wire Inserter
• Cuts wire to be terminated.
• Forces conductors into 2 slotted beams of the contact.
Anti-backup locator
Prevents connector from moving out of position for accurate
termination.
Feed Slide Automatically advances the connector after each termination.
Adjuster Provides wire insertion depth adjustment
Cam handle Activates the termination mechanism inside the head.
Ratchet Pawl
Releases the cam handle before it is fully closed should a problem occur
during termination operation.
! Stripping tool—three-way stripping tool—1PAC10349AKM (see Figure B-2)
Adjustment Screw
Blade Adjustmen
t
Figure B-2: Stripping Tool 1PAC10349 AKM
Cable crimping is performed in two stages:
1. Stripping the cable
2. Crimping the cable