User's Manual Chapter 10

Hardware Installation Guide Installing the IDR

02030311-06 Airspan Networks Ltd. 10-21

! Connector pinouts:

Straight-through cable

Crossover cable

6-Pin RJ-11

9-Pin D-type

female

9-Pin D-type

male

9-Pin D-type

male

Pin Function

Pin Pin Pin

1 Rx 2 4 3

ot connected - - -

C - - -

5 GND 5 1 5

6 Tx 3 3 2

- - -

To connect the IDR to the WipLL management station (PC):

1. Connect the 6-Pin RJ-11 connector to the IDR’s RJ-11 port (labeled Serial)

located on the IDR’s front panel (see Figure 10-14).

2. Connect the 9-Pin D-type female connector, at the other end of the straight-

through cable, to the 9-Pin D-type male connector of the cross-over cable (see

Figure 10-14).

3. Connect the 9-Pin D-type male connector, at the other end of the cross-over

cable, to the PC’s serial port (see Figure 10-14).