User's Manual Part 2a

Installing the BSR Hardware Installation Guide
4-12 Airspan Networks Ltd. 02030311-05
To connect the BSR to the backhaul through the SDA:
1. Attach the 15-pin D-type connector, at one end of the cable, to the BSR’s 15-pin
D-type port labeled DATA POWER SYNC, as displayed in Figure 4-6.
2. Attach the 15-pin D-type connector, at the other end of the cable, to the SDA’s
15-pin D-type port, as displayed in Figure 4-6.
3. Connect the SDA’s RJ-45 Ethernet port to the backhaul.
Note: For a detailed description of the SDA models, see Chapter 9, “Installing
the SDA”.