User's Manual Part 2a

Hardware Installation Guide Installing the BSR
02030311-05 Airspan Networks Ltd. 4-19
Notes:
1) For crimping cables for N-type connectors, see Appendix B, “Cable
Crimping”.
2) Ensure that the third-party antenna cable is of sufficient high quality to
reduce/eliminate loss when operating in the required frequency band.
Figure 4-10: Connecting BSR to N-type external antenna connector (third-party)
Warning: It is the responsibility of the person installing the WipLL system
to ensure that when using the outdoor antenna kits in the United States (o
r
where FCC rules apply), that only those antennas certified with the product are
used. The use of any antenna other than those certified with the product is
expressly forbidden in accordance with FCC rules CFR47 part 15.204. The
installer should configure the output power level of antennas according to
country regulations and per antenna type.