User's Manual Part 2a

Installing the BSDU Hardware Installation Guide
5-8 Airspan Networks Ltd. 02030311-05
5.6. Connecting to 100Base-T Networks
The BSDU’s front panel provides two RJ-45 ports for connection to 100Base-T
(labeled 100Base-T) ports. The 100Base-T ports are used for connection to the
WipLL management station and the service provider’s backbone (Ethernet).
! Connector: 8-Pin RJ-45 (male)
! Connector pinouts:
Pin Name Description
1 Tx+ Transmit Data+
2 Tx- Transmit Data-
3 Rx+ Receive Data+
4 NC Not connected
5 NC Not connected
6 Rx- Receive Data-
7 NC Not connected
8 NC Not connected