User's Manual Part 2b

Hardware Installation Guide Installing the BSDU
02030311-05 Airspan Networks Ltd. 5-13
5.9. Connecting to BSPS for Power
Management
The BSDU’s front panel provides a 9-Pin DB-type port for serial RS-232 power
management of the BSPS. WipLL’s WipManage manages BSPS by connecting to
the BSDU through the IP network (i.e., from the BSR), and then manages BSPS
through the serial connection between the BSDU and BSPS. The reason for the
serial connection is that the BSPS does not support SNMP-based management,
which is the basis of WipManage.
! Connector: depending on the BSPS model:
! 9-Pin D-type female (BSDU and BSPS)
-Or-
! 9-Pin D-type female (BSDU) to 8-Pin RJ-45 (BSPS) adapter (see Figure 5-6)
Figure 5-6: BSDU-to-BSPS power management connectors (RJ-45 to 9-Pin D-type
cable adapter)
! Cable length: 60 cm