System Description

Company name: Airspan Networks Inc.
Address: 777 Yamato Road
Suite 310 Boca Raton
FL 33431 USA
FCC ID:PIDAS1030A
AirSpeed 1030 3.55-3.7GHz (B48) statement
Each AirSpeed radio has been tested by an automatic testing station (which is calibrated weekly for
accuracy), which calibrates the unit prior to testing. Each AirHarmony contains 4 transmitters therefore each
in turn is calibrated by the station for RF output power accuracy. The calibration is then verified by
transmitting on the RF output power approved for each frequency checking that it does not exceed the
maximum conducted power allowed by the FCC as below:
 10 MHz BW: Pout=28.52dBm +/- 0.47dB; Pmin=28.05 dBm ; Pmax=28.99dBm
 20 MHz BW: Pout=31.49 dBm +/- 0.47dB; Pmin=31.02 dBm ; Pmax=31.96 dBm
For each frequency there is an internal software limit value that prevents the User from exceeding that RF
output power setting. In the event the RF output power is higher then specified in the System Description,
the AirHarmony radio doesn’t pass and acquires a Fail status.
AirHarmony boards with Fail statuses are rejected for final assembly of the product. The NMS management
program also has internal specific FCC output limits that further checks and verifies maximum RF power
output and prevents transmition above the FCC limits.
Name of authorized person: Zion Levy
Position: Compliances Team Leader
Date: October 23, 2020
Airspan Networks Inc.
Tel: [phone]; Fax: [phone], www.airspan.com