User's Manual

2-26
2.17. SNMP
Management  SNMP (can only be accessed by administrator)
This page is used to enable disable SNMP server as shown in Figure 2-26 and
Figure 2-27. When SNMP is enabled, the community string of the SNMP server can
be changed. After setting the configurations of these fields, press the “Apply” button
to write the new configurations into the CPE and press “Reboot” as shown in Figure
2-34, to reboot the system in order for the new configurations to take effect.
Figure 2-26 SNMP enabled
Figure 2-27 SNMP disabled