User's Manual

SSRM Module User Guide
Page 16 Commercial in Confidence UWB-D00234 Rev A
5 Connecting the SSRM Mini PCIe Module
Note: Carefully remove the SSRM Mini PCIe module from the packaging box
Caution: It is the responsibility of the person installing the SSRM module to
ensure that only those antennas certified with the product are used. The use
of any antenna other than those certified with the product is expressly
forbidden.
Caution: The SSRM module and the antennas must be installed only by
experienced installation professionals who are familiar with the local safety
codes and are licensed by the appropriate government authorities.
To connect the SSRM Module:
1. Make sure the unit is turned off. Remove the cover from the unit.
2. Carefully slide the SSRM Mini PCIe module into the mini PCI slot. Align the pins and push
evenly and slowly and ensure it is properly seated.
3. After the device has been connected, Windows will detect the module and you will be
prompted to install the software and drivers.
5.1 Typical SSRM Installation
The following displays a typical installation with the SSRM Mini PCIe module installed.
Figure 4 - Typical SSRM installation