User's Manual

System Overview
13
New CPE variants are equipped with Rosedale chipset enabling FDD/TDD multimode
operation, supporting 5 MHz and 7 MHz in both TDD and HFDD modes.
Mobile WiMAX upgrade-able
World’s First "Self-Install" WiMAX Subscriber Station - fast, easy and simple installation
Full Indoor Non-LOS Deployment -- 256 FFT
No professional installation, simply Plug and Play -- user unpacks, plugs in and surfs
Based on the latest wireless technology WiMAX IEEE 802.16 standard
Based on 802.16 ProWireless 5116 Rosedale chip
Compact unit occupying little space
Designed to sit next to a computer on a desktop (or mounted on a wall when external
antenna used)
Clip-on antenna containing four 90-degree, high-gain directional antennas providing 360
degree coverage (EasyST selects antenna with best RF reception) -- self pointing for easy
setup by untrained subscriber
Provides signal strength LEDs for quick and simple alignment with provider's base station
High throughput providing fast access at burst data rates of up to 37 Mbps over channel
bandwidths of up to 10 MHz
Supports transparent bridging
Supports multiple UL bursts per SS frame
Signal information can be obtained via Web Management Performance tool
Supports QoS (based on IP addresses, protocols, applications, DiffServ/TOS, 802.1p)
Smart Card (SIM) option
Configuration for Operator Network via integrated Smart Card (SIM) socket
Stackable Style Design for adding plug-in expansion modules for the following interfaces:
o Integrated IEEE 802.11b/g WiFi access point and 4 Port LAN Switch (EasyWiFi) allowing
you to add WiFi functionality to your EasyST.
o Integrated VoIP allowing connection of 2 conventional telephones (POTS) one Ethernet
and battery backup (EasyVoice) allowing you to add VoIP functionality to your EasyST.
Low cost
Note: Contact your Airspan representative for more information on the EasyVoice
extension module or the EasyWiFi extension module.
Note: Check product specifications for latest feature content.
Architecture
The EasyST is a self-install indoor unit requiring no professional installation. The EasyST
architecture includes the following components:
EasyST module with clip-on antenna
AC/DC power adapter with interchangeable plug prongs: plugged into a standard electrical
wall outlet (110/240 VAC, 50/60 Hz), supplying the EasyST with 6 VDC power
The EasyST provides a fast and easy mounting method by allowing you to simply place it on a
desktop/table. However, if an external antenna is used, the EasyST can alternatively be mounted on
a wall.
The figure below displays the EasyST architecture: