User's Manual

18
PHYSICAL DESCRIPTION
The EasyST's physical description is described in the following topics:
Physical dimensions
Ports
LEDs
LED Button
Physical Dimensions
The physical dimensions of the EasyST are listed in the table below:
Parameter Value
Dimensions
(H x W x
D):
With clip-on antenna: 130 x 145 x 145 mm (5.12 x 5.7 x 5.7 inches)
Without clip-on antenna: 30 x 145 x 145 mm (1.18 x 5.7 x 5.7
inches)
Weight: With clip-on antenna: 0.43 kg (approximate)
Without clip-on antenna: 0.3 kg (approximate)
Ports
The EasyST provides various ports on its top, bottom, and side panels, as described in the table
below:
Panel Port Interface
8-pin RJ-45 10/100BaseT Ethernet LAN Side
DC power
jack
6 VDC power (supplied by AC/DC power adapter)
6-pin header Integrated Antenna Controller for attaching clip-on antenna
(determines active antenna--1 out of 4)
Top (cover
exposed)
MCX jack Clip-on antenna or window-mount external antenna
(connected by RF cable)
30-pin IDC
socket
Plug-in extension module for the following interfaces:
802.11 WiFi and LAN Switch
VoIP and Battery Backup (EasyVoice)
Bottom
SIM Operator's defined parameters
The EasyST ports located on the top panel (with the clip-on antenna removed) are shown in the
figure below: