User's Manual

Physical Description
21
The EasyST LEDs are described in the table below:
LED Color Mode Status Description
On EasyST receiving power power Red
Off No power received by EasyST
On 10/100BaseT network device (e.g. PC)
correctly connected to EasyST
Flashing Active LAN link (i.e. traffic flow)
lan Green
Off No 10/100BaseT interface connected
to EasyST
On Active WiMAX link
Flashing Undergoing Network Entry
link Green
Off No WiMAX link
Customer mode
Average Signal to Noise Ratio (SNR)
All LEDs are off SNR < 5
First left-most
LED is on
5 <= SNR < 9
Two left-most
LEDs are on
9 <= SNR < 12
Three left-most
LEDs are on
12 <= SNR < 16
Four left-most
LEDs are on
16 <= SNR < 22
signal
Green
Five LEDs are on 22 <= SNR
PRO mode
Customer mode Off
Red Professional Mode
#1
On Modulation (See table below)
Green Professional Mode
#2
On RSSI (See table below)
signal
N/A Professional
Mode #3
N/A N/A