User's Manual

AirStream 4000/4001 WiMAX CPE User Manual

For TTLS authentication, both MD5 and CHAPv2 are supported. For a successful configuration of the TTLS

authentication, the following must be provisioned:

 Root certificate

 Identify or Network Address Identified (NAI)

 Inner Identity or User Name

 Password

6.5 Advanced Setting

Use the advanced setting to select IOT Mode and configure MS Capability and Network Access options.

IOT Mode can be enabled with a selection of more than 17 popular base station types. The “Unified” mode is

the default mode for IOT with many BS vendors.

The advanced setting also allow user to configure MS Capability and Network Access settings including auto

idle support, auto connect, and roaming and etc.

The MS by default supports IDLE, HANDOVER and IDLE. Depending on the BS type, these may need to be

disabled for better interoperability. For BS that support IDLE and SLEEP operation, the CPE should enable the

auto-idle and auto-sleep feature.

For Network Access settings, it is intended for service provider configuration. The auto-connect should be

always enabled to allow seamless user connection. Enable Roaming option to obtain the service roaming

capability. The rest of setting should be configured by the service operator and user should not alter them.