User's Manual

AirStream 4000/4001 WiMAX CPE User Manual

Call waiting:

For the second incoming call, the user has the following two options to take the new incoming call:

■ Option 1 - flash hook and press 1, the old call will be dropped and the new call will be connected.

■ Option 2 - flash hook and press 2, the old call will be hold and the new call will be connected. Flash

hook and press 2 again will switch the connection to the previous call.

Call Transfer:

After receiving the call from the first party, user can flash the hook and dial the second party. After the

second party answers the call, user has the following option to proceed:

■ Option 1 - hang up the phone and transfer the first call to the second party.

■ Option 2 - flash hook and press 1, the second party will be dropped and the first party will be

connected.

■ Option 3 - flash hook and press 2, the second party will be on hold and the first party will be

connected. Flashing hook and press 2 again will switch the connection to the second party and etc.

Local and Net 3WC:

After establishing the two calls (one on hold and one connected), the user can conference three parties by

flashing the hook and press 3. Of course, instead of conferencing, the user still has the option to switch

calls by flash hook and press 1or 2.

Blind Transfer:

After receiving the call from the first party, the user dials the blind call transfer service codes (e.g. *68) and

the second party number to transfer the call to second party. The user then hangs up the phone.

Call Park/Call Pickup:

After receiving an incoming, the user flashes hook and dials the call park service code (e.g. *98) + another

party number, the call will be parked for the second party in the network.

Another user can pickup the parked call by dialing the Call Pickup Service code of the call from the first

party, and the user dials the blind call transfer service code (e.g. *99) and the second party number to

retrieve the call.

If a parked call is not picked up within certain time, the call will be discarded by the system.

9.6 Line Features

User Settings specify user specific parameters for supplementary services. These settings will remain even their

associated features are deactivated, so that users are not required to set them next time.

Hotline refers to automatic dialing out to a pre-determined number, if a user takes a phone off hook but dials