Installation Guide

AirVelocity 2700 5G Sub-6Hz
4T4R Indoor Radio Unit – Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev. A3, Apr 2021
8
3 Verifying Prerequisites
Prior to installing the AirVelocity 2700 5G Sub-6Hz, verify the required safety, power, tools, parts and
components. This chapter includes the hardware, software, and client requirements for installation.

Important: Set up requirements for the installation is detailed in the Job Sheet, see
Appendix A.
3.1 Verifying Site Requirements
To set up the AirVelocity 2700 5G Sub-6Hz, an IP connection to an Airspan Control
Platform (ACP) is required.
3.2 Verify Installation Requirements
3.2.1 Verify the Tools
Table 2. Minimum Hardware Requirements
Tool Use
Philips screwdriver (PH2) for securing the suspended ceiling bracket with M3X6 screws,
and safety screw after unit is attached to bracket
Screwdriver/wrench Appropriate tool for fastening bracket to ceiling or wall
3.2.2 Verify the Parts and Kits

Verify your order and requirements to ensure the correct unit type is being installed.
Table 3. Parts & Kits
Installation Kit /
Part
Part No.
Airspan
No.
Consisting of: Image
AirVelocity 2700
5G Sub-6 unit
AV27-F330-P4CXP-FM-A
AV27-F360-P4CXP-FM-A
AV27-N48-P4CXP-FM-A
AV27-N41-P4CXP-FM-A
AV27-F460-P4CXP-FM-A
AV27-F470-P4CXP-FM-A
AV27-F330-P4CXP-FM-C
AV27-F360-P4CXP-FM-C
AV27-N48-P4CXP-FM-C
AV27-N41-P4CXP-FM-C
AV27-F460-P4CXP-FM-C
998-20-042
998-20-040
998-20-146
998-20-151
998-20-148
998-20-144
998-20-170
998-20-172
998-20-174
998-20-176
998-20-178
AirVelocity 2700 5G Sub-6Hz