Product specifications

Transport with forklift is possible.
Easy
Installation
FEATURE
S
From transportation of the product to
address setting for commissioning,
significant improvements have been made
which reduce the cost of installation.
Simple wiring methodOther wiring method
Design of outdoor unit allows for
lifting straps to be used
Up to maximum
length
3,600m
Installation is made easier as the communication
wiring can be connected continuously to any
component.
Simple signal line connection
20%
weight reduction
(Than Previous model)
Note: In the case of 14HP
Light weight
Easily craned
using lifting belt hooks
Transporting by
forklift
Can be transported in
a small elevator
V-II series
Note: In a multiple refrigerant system installation,
Automatic addressing sequence cannot be initiated
The address of each indoor unit can be automatically
set by button switch of outdoor unit.
Automatic address setting
Four way piping connection
Piping and wiring are available to the front, left and
right, and bottom.
Easy access
Expansion of
work space
By adopting a L-Shape front panel that can be
removed, the work space for installation and service
has been significantly expanded by this new design.
For multiple installations, work is performed easily and
efficiently even in a narrow space.
Automatic address setting is
performed at outdoor unit
Addresses are automatically
distributed from outdoor unit.
Manual address setting from indoor unit and remote controller is also possible.
7 1
0
2 4 5
6
Press the pushbutton
switch of outdoor unit.
Eliminating oil equalization pipe
Easily transported
Easy piping connection
The need for an oil equalization pipe as required on
the previous model has been removed.
The installation costs have been reduced by
employing a simple 2 pipe connection
3
10
11