Brochure

5
Contact: RectorSeal
®
713-263-8001 800-231-3345 713-263-7577 800-441-0051 rectorseal.com
P F W
Condensate pumps designed for mini-split systems.
Seven pump models
• Aqua • Orange • Lime • White
• Peristaltic • microV • Mini Tank
Four considerations
• Appearance - A concealed (Aqua,
microV) or remote condensate pump
(Orange, Peristaltic, mini tank) will
preserve the attractive nature of
any mini-split installation. Surface
mounted pumps (Lime or White) are
neatly covered. All pumps are hidden
from view and provide a clean finished
appearance.
• Quiet Operation - Choose a
remote pump (Orange or Peristaltic)
installation for the quietest operation
in noise sensitive areas. Silent + mod-
els are also available. They run quieter
and are designated by SP suffix.
• Ease of Installation - Aspen®
pump models can accommodate any
installation. See the guide and chart
(page 13) for options.
• Maintenance - Pump models
with filters must be cleaned
regularly. Choose a surface type pump
(Lime or White) for easy filter access
or a pump which requires no filter
(Peristaltic).
Two mini-pump types:
• Split - (Orange, Aqua or microV
series) are designed with separate
pump and reservoir. The pump
includes an electronic PCB and the
pump motor.
The reservoir contains the filter
and the switching mechanism to
activate the pump, and must always
be kept level and clean for proper
operation of the float switch. The
filter must be cleaned regularly. The
2 elements are connected together
with a length of 1/4” ID vinyl tube and
a communication cable, both of which
are usually around 6 feet long. On
our orange series pumps, this may be
extended if required.
• Monobloc - (Lime , White series,
mini tank) are designed with both
the pump and reservoir as one
integral unit, sharing a common body.
No connecting tubes or wires are
needed. All mini pumps are cooled
and lubricated by the water flowing
through them. They require a float
switch to detect the presence of water
in the drain pan and activate the
pump only when water is present.
SELECTING THE CORRECT ASPEN MINI-PUMP
Aspen
®
pump features:
• Quick and easy to install
• Fit any mini-split, up to
157,000 BTU/hr
• Self priming
• Hall effect sensors operate
on water rise
• Dry contact for overflow
protection
• Cleanable filters
• Quiet - 21dB (A) to 47dB (A)
• Thermally protected
• Maximum water temperature
104 degree F
• Discharge hose 1/4” ID
• Kits include all components
required
• Anti-siphoning device
included
• 24 month limited warranty
NOTE: Sound level and pump
performance varies with voltage and
frequency.

Commercial Residential