User's Manual

buttons at the same time can cause the Selcall mode to

be cancelled and generate an automatic identification.

Please have your radio technician or dispatcher fully

explain this operation.

Charger and Battery

1. Battery (Ni-Mh)

Voltage DC 7.5V

Duty time (5-5-90) Over 10 hrs

2. Charger

Input power (90~250VAC)

Operating temperature 10-30 deg. C

Connect the charger to an appropriate outlet (90~250 VAC).

Turn the transceiver power off and place the radio into the

front socket of the charger. The red light illuminates during

charging and the green light comes on when the charge is

complete. When you place two batteries in the charger at the

same time, the front battery will charge first. The rear battery

will begin charging when the front battery charge is complete.

On Charging

Red

Blinking Abnormal battery

Green On Fully charged

On Stand-by for charging (rear cup) Orange

Blinking Discharging

 When you put a battery in the rear cup of the charger the

charger checks the voltage. If voltage is over 7.4V, the

charger starts discharging for 4 minutes then checks

again. If voltage is still more than 7V, it discharges until

the voltage is 6V then starts charging.