Product specifications

10
icountACM20
State-of-the-art Fuel Contamination Monitoring
The icountACM20 Portable Particle
Counter has been developed from
existing technology for monitoring
contamination in AVTur and other
hydrocarbon fuels, in accordance with
Energy Institute (EI) Method IP 564.
In addition, the ACM can also be used
to monitor fuels from existing sampling
points in locations from refineries,
pipelines, distribution terminals, fuel
supply storage.
APPLICATIONS
 Fuel Testing Laboratories -
DEFSTAN 91-91 Issue 6
 Distribution Terminals/Hubs: use
on receipt and outbound supply.
Also provide checks for filtration
performance, tank cleanliness and
product quality
 Storage: reduce settling time by
monitoring to determine if dispersed
contamination are below acceptable
levels
 Airport Fuel Farm: monitoring of
fuels into storage, through fuel farm,
hydrant system and during uplift
into wing
 Oil and Gas Platforms: monitor
filtration performance, system
cleanliness and quality of delivered
product
FEATURES & BENEFITS
 2 minutes test time
 Optical scanning analysis and
measurement of actual particles and
inference to water presense
 Primary outputs: 4, 6, 14, 21, 25,
30u counts per ml
 % Volume distribution, via graphical
display on handset and printout
 ISO 7-22 in accordance with ISO
4406-1999
 32 Character two line dot matrix
LCD. Full alphanumeric entry
facility on keypad
 Access up to 300 saved test
 Calibration in accordance with
Parker Calibration Procesure
CM20-N, which complies to
ISO11171:1999, Clause 6 (Omitting
Annex F)
 Re-calibration every 12 months by a
dedicated Parker Service Center
 420 bar Max. Working Pressure
 +5° C to +80° C
 Interface via RS232 (USB serial
cable to RS232 option available)
 On-board rear mounted
pump for lab sampling
 On-board battery and carry case
with wheels (13 kg total weight)
 12v DC input, 6 “D” cell batteries or
rechargeable battery pack
 Integrated 16 colum printer for hard
copy data
 Complies with all relevant EC
declarations of conformity
 Integrated Mounted Pump:
 Powered directly from ACM20
 Direct sampliing from fuel
sample bottles or tank via 3
meter inlet suction tube
 Incorporated double speed
flush and test sequence
 Managed flow rate/correct
volume sample as per IP 564
test method
232
option
available)
e
ar moun
te
d
b
sam
pl
ing