Product specifications

11
Field Monitoring
For use in non-hazardous areas, the
icountACM20 is desigend for online
sampling of hardrocarbon fuels, utilizing
existing “quick connect” sampling points
such as the Milipore Adaptor.
Input Power Socket (note that you will
have to remove the plastic dust cap to
access the 12Vdc power socket)
A fast blow 1.25A fuse and the RS232
connection are located behind the
removable cover plate. The RS232
interface is provided to download all test
data stored in the instrument.
SPECIFICATIONS
 Construction:
 Case: ABS Structural Foam and
Injection Molded
 Handheld Display: ABS
 Keypad: Fluorosilicone Rubber
 Mechanical Components: Brass,
plated steel, stainless steel and
aluminum
 Seals: fluorocarbon
 Hoses: Nylon (Kevlar braided
microbore), stainless steel armoured
ends
 Flow rate: 25 - 28 ml/min (dictated
by CMP) 100 ml/min with additional
flush button
 Fluid Compatability: Hydrocarbon
Fuel, Mineral Oil. For other fluids
consult Parker
 Fuse: 1.25 amp fast blow fuse
included for overload protection
(spare supplied)
 icountACM20 Technology: Flow cell,
light obscuration
 Repeatability/Accuracy: As per or
better than ISO 11171
 Coincidence: 40,000 particles per
ml
 Viscosity range:
1 - 100 centistokes
 icountACM20 Weight: 8 kg (17.6 lb)
 Monitor Carrying Case: Astra Board
case
 Carrying Case Weight: 5 kg (11 lb)
Transfer Pump
Flush Button
Transfer Pump
On/Off Switch
Link Hose
(Fixed to
dummy
connector for
storage)
Sample Hose
Inlet and
Outlet
Hose Tidy
Clips
Transfer Pump
Housing
icountACM20 - Rear View