Product specifications

16
Flow Differential Pressure Module (FDPM
®
)
Automatic Calculation of Corrected
Differential Pressure for Varying Flow Rates
The FDPM® MK II builds on its field tested predecessor. Designed to comply with
the requirements of industry standards such as ATA 103 and JIG Guidelines, the
FDPM® MK II eliminates this normally complicated calculation by automatically
calculating the condition of the filters inside a vessel based on the inputs from
differential pressure and flow-rate sensors. FDPM® MK II can be used with either
mobile or stationary equipment.
BENEFITS
 Designed with ATA 103 & JIG
Guidelines data collection
requirements in mind
 Removes human judgment
regarding condition of filters
 Simplified for the refueling operator
yet highly configurable by the fuel
master
 Interactive touch screen display
enables easy operation even for
gloved users
 Condition based alarms can be set
to halt the fueling operation
 Intelligent detection of sudden
increases or decreases in differential
pressure
 Security codes prevent resetting
of key values by unauthorized
personnel
 Over 3 years of data logging
automatically stored via a
MicroSD card
For additional information see
www.velcon.com/fdpm
DISPLAY OUTPUTS
 Corrected DP
 Actual DP
 Flow Rate
 Peak corrected and actual DP
 DP rise or drop alarm
PU
T
S
F1- Corrected dP
and Flow Information
F2- Tabulated Averaged and
Maximum Values for the
Refueling Session
F3- Real-time
Corrected dP Chart
F4- Supervisor Menu
INTERACTIVE TOUCH SCREEN DISPLAY