Specifications

10 ElectraGlide Instruction Manual
SWITCH ON THE TRANSMITTER
21. The ElectraCam comes with an EScale
2.4GHz. Transmitter.
22. Install 8-AA batteries (sold separately) into
the battery compartment located in back of
Transmitter case.
23.
PLEASE READ THIS
Always turn your transmitter ON
before you turn your plane on.
Always turn your plane OFF before
you turn your transmitter OFF.
Note: Ensure the throttle stick and trim slider
are in the down position (mode 1 shown).
The other trim sliders should all be centered
as shown.
24. Turn on the transmitter by pushing the ON/OFF
sliding switch forward..