Specifications

11ElectraGlide Instruction Manual
25. After turning ON the transmitter, remove the
canopy of the ElectraGlide and place the
ground.
Locate the charged battery and also take note
of the white velcro patch on the bottom of the
battery.
Note: Double check your transmitter is ON.
26. Connect the RED plug from the battery to the
RED plug from the ESC in the ElectraGlide
fuselage.
You should hear the servos come to life
Note: If the servos do not come to life unplug
the battery, wait a few seconds and try
again.
27. Secure the battery in the position shown
using the velcro on the battery and the
preinstalled velcro in the fuselage.
28. Replace the canopy.
PREPARE FOR FLIGHT