Specifications

13ElectraGlide Instruction Manual
CONTROL CHECKS
44. Elevator is controlled by the elevator stick.
Check that the direction and distance of
movement is correct.
45. Stick toward the bottom of the transmitter
the elevator should move up. When moved
toward the top of the transmitter the elevator
should move down.
46. If the direction is incorrect, switch the servo
reversing switch CH2 on the front of the
transmitter.
47. Adjust the position of the clevises on the
servo and horn to get approx. 10mm in each
direction measured at the trailing edge.
Note: Check that rudder trim is centered.
48. Rudder is controlled by the rudder stick.
Check that the direction and distance of
movement is correct. Stick to the right,
rudder should move to the right and stick to
the left, rudder should move to the left.
49. If the direction is incorrect, switch the servo
reversing switch CH4 on the front of the
transmitter.
50. Adjust the position of the clevises on
the servo and horn to get approx. 15mm
movement in each direction measured at the
trailing edge.
Note: Check that rudder trim is centered.
Left Rudder
Right Rudder
Down Elevator
Up Elevator
Neutral Rudder
Neutral Elevator