Specifications

7ElectraGlide Instruction Manual
10. Connect the clear clevises to the elevator
horn and rudder horn. Push the ends of
the clevises fi rmly together to prevent them
coming off in fl ight.
Beginners should use the outside hole on the
horn.
More advanced fl yers can use the inner holes
to increase control throws and sensitivity.
11. Locate the wire wing spar.
This will be installed with the ends pointing
up as shown.
12. Feed the wing spar through the plywood plate
in the fuselage with the ends pointing up.
13. Slide the wing panels onto the wire wing spar
making sure the ends of the wire are pointing
up not down.
Connect the elevator servo lead in each wing
to the matching leads in the fuselage.