Use and Care Manual

Note:
Adding a Hub or Wave device must be done through the Airthings Wave App and not
through the Bluetooth settings of the phone.
STEP 6 Link devices to Hub
If you have new Wave devices, the devices must first be added to your Airthings account
before they can be linked to a Hub. Make sure to sync your device before you connect it to
the Hub.
After the Hub has been successfully added to your account, you will need to link your existing
Wave devices to the Hub before they come online. To link a device to the Hub, select the
icon on the app device overview after the Hub is added.
Depending on the firmware version of your Wave devices, the devices might need to go
through a firmware update as part of the Hub configuration.
STEP 7 Congratulations!
After linking of a Wave family device is complete, the device will start searching for a Hub and
connect to any of your Hubs.
This process typically takes between 15 minutes to 1 hour.
Once your devices are connected to the Hub, the device overview screen in your app will
show a signal strength indicator next to each device, instead of the Bluetooth icon. This
shows that your device is connected to the Hub and as long as there is one bar, the
connection is working.