User manual

DHCP Relay Agent
DHCP relay makes it possible for a DHCP server on a different
network to assign local IP addresses to clients connected to your
device. To enable this, the address of the device (modem, server
etc) that runs the DHCP service needs to be known. If DHCP Relay is
enabled the DHCP server on your device is disabled and cannot
assign IP addresses to clients. To configure DHCP Relay Agent select
"DHCP Relay Agent" and enter an IP address for the device, DHCP
Server name and address of the DHCP Server. Click "Save" to save
your settings.
DHCP Client
If your device is supported this feature, DHCP client mode
configures the device to obtain an IP address from a DHCP server on
the network . You can use this option if you would like your device
to get an IP address from a DHCP server on the local network. You
also have to specify which VLAN is to be the listening interface.
Click "Save" for your settings to take effect.