User Guide

5.8Ghz low power radar sensor
Radar sensor
Version 1.0
Page
11
When testing host product, the host manufacture should follow FCC KDB Publication
996369 D04 Module Integration Guide for testing the host products.The host product shall
work normally, all the transmitters installed must be operating, investigate the fundamental
and unwanted/spurious emissions with the modular transmitter(s) operating in a normal
mode. When testing for emissions from the unintentional radiator, the transmitter shall be
placed in the receive mode or idle mode if possible, if receive mode only is not possible, test
laboratories may need to add attenuation or filters depending on the signal strength of any
active beacons (if applicable) from the enabled radio(s).