User's Manual

WN-210 11Mbps WLAN Mini-USB Adapter

1. INTRODUCTION

This document describes how to install the WN-210, WLAN Mini-USB Adapter.

WLAN is local area networking without wires, which uses radio frequencies to transmit

and receive data between PC’s or other network devices. WLAN is able to configure

independent networks and infrastructure networks. The former is suitable for small or

temporary peer-to-peer configurations, and the later is offering fully distributed data

connectivity via micro cells and roaming.

1.1 Package Contents

Before starting installation, please make sure the package you purchased

includes the following three items:

 One WLAN Mini-USB Adapter

 One Mini-USB cable

 One setup CD-ROM with User’s Manual

Please contact your vendor if anything is missing or damaged.

1.2 System Requirements

To install the WN-210 successfully, your computer should meet the following

minimum requirements:

 Pentium-Class 200MHz or faster Processor

 64MB RAM Recommended

 Available USB port

 CD-ROM Driver

 Windows 98SE, Me, 2000, or XP operating system

 Minimum 5 Mbytes free disk space for installing the driver and the utility program

2. GETTING TO KNOW YOUR WLAN MINI-USB ADAPTER

2.1 The WLAN Mini-USB Adapter’s USB Port

The WLAN Mini-USB Adapter’s Mini-USB Port is located on the lower side of front panel.

USB Port The USB Port is a port installed in your PC, enabling you to connect to USB

peripherals. To work with USB ports, your PC must be running Windows

98SE, Me, 2000, or XP.