User's Manual

11
Check the descriptions below to obtain detailed information about each command in this menu.
Wireless Radio On
Choose Wireless Radio On command to receive the radio frequency signals.
Wireless Radio Off
Choosing Wireless Radio Off command will stop receiving the radio frequency signals.
Remove Status Icon
If you do not wish to have the WLAN-54G USB Configuration Tool icon displayed in the system
tray, please choose this command. Therefore, once the computer is rebooted, the icon will
reappear. Clicking Start on the taskbar, choose Program from the menu, and then point to
WLAN-54G USB Configuration Tool in the submenu of WLAN-G TOOLS can also launch the
utility anytime.
Wireless Network Status
Choose this command to launch the Status tab of the Wireless Settings dialog box. For more
details about this tab, please refer to The Status Tab in the Configuration Tool Basics section
below.
Advanced Configuration
Choose this command to launch the Configuration tab of the Wireless Settings dialog box.
Please refer to The Configuration Tab in the Configuration Tool Basics section below to gain
more information about this tab.
WEP Encryption
Choose this command to launch the Encryption tab of Wireless Settings dialog box. This tab
offers you a number of options to maintain the secure management in a wireless LAN
environment. See the explanations in The Encryption Tab under the Configuration Tool Basics
section below for more details.
IBSS Channel
Choosing this command will launch the IBSS tab of the Wireless Settings dialog box. To obtain
more information about this tab, please refer to The IBSS Tab in the Configuration Tool Basics
section below.
Version Information
Choosing this command will launch the About tab of the Wireless Settings dialog box. The
About tab reveals general information on your Wireless 802.11g/b USB Module, including the
release version of driver, the WLAN-54G USB Configuration Tool and the USB network
adapter’s MAC Address.