User's Manual

6
Figure 2.1-6: The Message Box of Insert Disk in Windows 98 System
Now you shall find the WLAN-54G USB Configuration Tool tray icon, , appeared in the system
tray. The installation is entirely finished at the moment.
Double-click the icon is able to launch the application and open the Wireless Settings dialog box,
in which you may freely arrange your network connection afterwards.
For more details about WLAN-54G USB Configuration Tool, please refer to WLAN-54G USB
Configuration Tool Basics in this manual.
2.2 Installation Notes - Windows XP
If your system is running Windows XP, you shall find three tabs displayed in the Wireless Settings
configuration interface after you’ve followed the instructions above and successfully installed the
drivers and utility. However, normally, the dialog box should be consisted of six tabs. This is
because Windows XP has its built-in configuration tools – Wireless Zero Configuration to assist
you in wireless networking activities. It is recommended to utilize the attached WLAN-54G USB
Configuration Tool to enjoy more benefits it will bring.
Thus, to employ your WLAN-54G USB Configuration Tool under Windows XP, please proceed to
the following procedures to switch the default settings of Wireless Zero Configuration to
WLAN-54G USB Configuration Tool.
Figure 2.2-1: The WLAN-54G USB Configuration Tool Tray Icon
Figure 2.2-2: The Wireless Settings Dialog Box