802.
802.11b WLAN CF Card For OEM Installation Guide STATEMENT FOR MODUAL APPROVAL This product is sold to OEM integrators only. The manual for the OEM integrators must include some instructions to be followed by the end users in the user manual. For example: - The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. - The OEM integrators must be instructed about the end product labeling ("Contains TX FCC ID: QDWWN500").
“ IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." 1 .Portable radios equipment are herein defined as radios that have their radiating elements normally operating 20 cm or less from the body of the user or of nearby persons.
No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from the copyright owner. All the other trademarks and registered trademarks are the property of their respective owners. Statement of Conditions We may make improvements or changes in the product described in this documentation at any time.
--Consult the dealer or an experienced radio/TV technician for help. The equipment is for home or office use. R&TTE Compliance Statement This equipment complies with all the requirements of the Directive 1999/5/EC of the European parliament and the council of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity(R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EE C. As of April 8, 2000.
The 802.11b WLAN CF Card aims to let your computer quickly and seamlessly communicate with 802.11b (at up to 11 Mbps) networks . Wireless LAN is local area networking without wires, which uses radio frequencies to transmit and receive data between PC’s or other network devices. Additionally, wireless LAN is able to configure either independent networks , which is also known as peer-to-peer or ad-hoc network, or infrastructure networks .
3. 4. 5. 6. 7. In the Welcome dialog box, click Next to proceed. In the Software License Agreement dialog box, choose Yes to accept the agreement. When the Setup Complete dialog box is prompted, click Finish. Restart your computer then. After rebooting, plug the 802.11b WLAN CF Card into your PC’s CF slot. Windows will automatically detect the input device and display the New Hardware Found message box as below. Meanwhile, you will find the PRISM Configuration Utility icon appeared in the system tray.
XP, please proceed to the next step to change the default settings of Windows Zero Configuration to PRISM Configuration Utility. 12. Right-click the Network Connections icon at the task bar to open the Wireless Network Connection Status dialog box, and then select Properties. 13. Choose the Wireless Networks tab in the Wireless Network Connection Properties dialog box, and remove the tick in the Use Windows to configure my wireless network settings checkbox. 14. Click OK.
DGT Statement: 依據交通部電信總局低功率電波輻射性電機管理辦法; 第十四條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性及功能。 第十七條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停 用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 -9-
802.11b CF介面無線網路卡可讓您的電腦快速而平穩的與符合 802.11b(速度達 11Mbps)規範 之網路溝通。無線區域網路是一個以無線電頻率取代實體線路，在個人電腦與其他聯結上的 元件間，傳輸資料的區域網路。此外，無線區域網路之組態包括獨立網絡，亦稱為對等共享 (Ad-Hoc)的點對點(peer-to-peer)傳輸模式；以及基礎建設模式 。前者適合小型或暫時性的 點對點傳輸，後者則透過微細胞(micro cell)及漫遊(roaming)提供大範圍的資料流通。 Ad-Hoc Network Configuration Infrastructure Network Configuration Internet Access Point Printer Wired Network 請依據您使用的作業系統版本，在下文中選擇對應的段落，安裝您的 802.11b CF 介面無線網 路卡，及產品內附的 PRISM 組態設定工具程式。 Windows 98 使用者安裝步驟 1. 將產品內附之安裝光碟置入您的光碟機，安裝精靈會自行啟動。若未自行開始安裝，則請 手動執行 Setup.exe。 2.
1. 將產品內附之安裝光碟置入您的光碟機，安裝精靈會自行啟動。若未自行開始安裝，則請 手動執行 Setup.exe。 2. 歡迎使用 Windows 適用的 PRISM 驅動程式對話方塊會出現。點選完成以便繼續。 3. 在歡迎使用對話方塊中，點選下一步。 4. 在軟體授權合約對話方塊中，選擇是，接受合約。 5. 在安裝完成對話方塊中，點選完成。 6. 重新啟動您的電腦。 7. 電腦重新啟動後，將 802.11b CF 介面無線網路卡插入您個人電腦上的 CF 插槽。 Windows 會自動偵測新裝置，並出現發現新硬體之訊息方塊。這時，您將會發現 PRISM 設定工具程式圖示已出現在系統列上。 Windows 2000 使用者安裝步驟 1. 將產品內附之安裝光碟置入您的光碟機，安裝精靈會自行啟動。若未自行開始安裝，則請 手動執行 Setup.exe。 2. 歡迎使用 Windows 適用的 PRISM 驅動程式對話方塊將會出現。點選完成以繼續。 3. 在歡迎使用對話方塊中，點選下一步。選擇取消將中斷安裝程序。 4. 在軟體授權合約對話方塊中，選擇是，接受合約。 5.
Windows XP 系統上使用 PRISM 設定工具程式，請進行下一步驟，將預設之 Windows 無線零設定，改為 PRISM 設定工具程式。 12. 在工具列的網路連線圖示上按滑鼠右鍵，開啟無線網路連線狀態對話方塊，選擇屬性。 13. 在無線網路連線屬性對話方塊中，選擇無線網路標籤，並取消使用 Windows 設定我的 無線網路設定核取方塊內的勾選記號。 14.
