User's Manual

AW 96 Series System Installation Manual
___________________________________________________________________________
AirWalk Proprietary and Confidential Page 33 of 56 6/14/2006
Section Description Reference
3
6.1 RF Cable - AW-96 RU N/A
6.3 Ethernet Cable – AW-96 to RU N/A
Table 7-1 - Internal System Cable Reference
8.2.3 External System Connections
5
To install new internal connections refer to the Section and Figures in the following Table
for proper cable installation.
Section Description Reference
3
6.1 External Diversity Antenna System Figure 6-2
6.2 Electrical Power Cable
Figure 6-3
Use AC power
cables supplied
with AW-96.
6.3 External BSC & BTS Ethernet Cable Figure 6-4
6.4 External GPS Antenna Cable Figure 6-5
Table 7-2 - External System Cable Reference
8.2.4 Connect Power to Cabinet
Connect -48VDC to DC distribution panel (if applicable).
Connect 120VAC or 240VAC to Rack AC distribution panel (if applicable).
8.2.5 Connect Communications Facilities
Connect LAN Facilities to BSC
Connect LAN Facilities to BTS.
5
WARNING: Make sure all system power supplies are turned off. All
breakers/Fuses are pulled on all main and intermediate panels. Then proceed with
the Installation.