User's Manual

AW 96 Series System Installation Manual

___________________________________________________________________________

AirWalk Proprietary and Confidential Page 40 of 56 6/14/2006

Figure 8-11 - PN Check Screen

8.3.2.9 Test Case #9 – System Interface Check

8.3.2.9.1 Test Procedure

• Command: Ping

Send Ping Command to the Following system IP Addresses

1. WPM (Wireless PBX Manager)

2. PDSN (Packet Data Serving Node)

3. CA (Call Agent)

4. MG (Media Gateway)

5. SG (Signal Gateway)

8.3.2.9.2 Expected Result of Case #X

A successful PING command response from each system.

8.3.3 Operation Tests

These test cases are designed to determine if AW 96 is ready for production testing.

8.3.3.1 Test Case #1 – Voice Calls

8.3.3.1.1 Test Procedure

Test Call From MS #1 to MS #2.

Test Call From MS #1 to Landline Phone #1.

8.3.3.1.2 Excepted Result of Case #1

1. 2

MS Rings and call is answered