User's Manual

AW 96 Series System Installation Manual
___________________________________________________________________________
AirWalk Proprietary and Confidential Page 46 of 72 6/14/2006
10 Installation Procedures
This Section gives definitions and instructions for installing the AW-Series IP-RAN and for
connecting it to the wireless carriers infrastructure. It contains detailed definitions needed
for completing site Installation Checklist (Appendix B).
10.1 Installation Verification
Before installing the equipment, it is necessary to verify the following:
10.1.1 Verify Customer Contact & Equipment location
10.1.1.1 Contact Customer
1
1) Verify contact name check Site Preparation Planning Checklist Appendix B.
2) Verify contact phone number.
3) Introduce yourself to the Customer contact.
4) Introduce Installation team (if more than one person on team).
5) Verify that all current customer contacts are listed.
a) Verify that contacts can solve problems within a timely manner for:
i) Power Connection(s),
ii) T1 Connection(s),
iii) LAN Connection(s),
iv) If not, have main customer contact provide names and method of
contacting.
6) Determine when contacts are available for help (e.g.; Time of day, day of week.).
7) Obtain any site access or security requirements (e.g.: ID Badges, Card-keys, Keys,
Access codes) required to access installation site.
8) Indicate all changes on checklist.
10.1.1.2 Locate AW-SERIES IP-RAN Equipment.
2
1) Determine where AW-SERIES IP-RAN is stored.
2) Check for any visible shipment damage.
1
NOTE: Make sure all changes are sent to the Installation Coordinator Immediately.
2
NOTE: If any visible damage contact the Installation Coordinator immediately.