User's Manual

AW 96 Series System Installation Manual
___________________________________________________________________________
AirWalk Proprietary and Confidential Page 57 of 72 6/14/2006
2. Landline phone Rings and call is answered.
10.3.3.2 Test Case #2 – Data Calls
10.3.3.2.1 Test Procedure
1. A Test Data Call From MS #1 to MS #2.
2. A Test Data Call From MS #2 to MS #1.
10.3.3.2.2 Excepted Result of Case #2
1. A Data Session is established between MS #1 and MS #2.
2. A Data Session is established between MS #2 and MS #1.
10.3.4 Operator Specific Tests
These test cases are covered in a separate test plan document and are agreed to by the
operator and AirWalk Communications, Inc.
10.4 Site Clean up and Customer Signoff
10.4.1 Dispose of all packing material.
Make sure to dispose of all AW-SERIES IP-RAN packing material.
10.4.2 Clean-up site.
Make sure not to leave anything but the installed AW-SERIES IP-RAN. (e.g., excess tie-
wraps, bolts, etc).
10.4.3 Update Installation Checklist.
Make sure all changes are notes on Installation Checklist.
10.4.4 Customer Signoff.
Get Customer Signature on Certification Document Appendix D.
10.5 Required Tools and Supplies
1) Hand Tools
a) Screwdriver set,
b) Pliers set,
c) Nut Driver set,
d) Cutter set,
e) Punch Down Tool,
f) Wire-wrap (Optional),
g) RJ-45 Crimper.