Installation Guide
EdgePoint PRO Installation Guide
______________________________________________________________________________
AirWalk Proprietary and Confidential Page 14 of 19
5.2 eFemto Location for Installation
The following list defines the eFemto location requirements for deployment inside the
building:
• Flat 24”x24” wall space so a physical clearance of 5” on all sides of the device is
observed to ensure efficient operation of the cooling fans and antennas
• A building support beam for mounting support (recommended)
• Access to a AC power source and breakers to accommodate up to 15 amps / 120
VAC (ceiling access is recommended)
• Access to an Ethernet port to connect the enterprise LAN line to the internet
backbone (ceiling access is recommended)
• Must be within 15 ft (5m) from a window that has no metal sheeting with a clear
view of the sky
• Moderate temperature between 32°F and 122°F
• Dry environment with relative humidity between 0 to 95% non-condensing
Equipment needed for installation:
• Drill or screwdriver with medium Phillips head
• Step ladder to install and connect the cables
• 3 screws size #10 pan head x 2” with washer to install mounting plate
• 3 wall anchors optional (if required for wall mounting)
>6ft(2m)
<15ft(5m)
GPSAntenna
Ethernet
connection
Power
connection
Figure 4 - Possible Mounting Location for an eFemto device