Installation Guide

ManualsBrandsAirWalk Communications ManualsElectronicsEdgePoint PRO

EdgePoint PRO Installation Guide

______________________________________________________________________________

AirWalk Proprietary and Confidential Page 19 of 19

If this LED turns “Red”, check the following:

• The device is able to send and receive signaling messages with the SeGW using the

WAN

• The SeGW has been configured with the valid information for this device

• Ensure that the DNS server information provided by the DHCP server is valid and the

DNS server is able to resolve the SeGW FQDN

GPS: This LED defines the GPS lock status of the device. This LED will turn “Red” if there

are not enough tracking satellites visible to the device. It will blink “Blue” when trying to fix

a GPS lock and will turn “Blue” when GPS lock has been achieved on the device.

If this LED turns “Red”, check the following:

• Ensure that the GPS cabling is connected on the device

• Reposition the GPS antenna

SYS: This LED defines different states of the device. This LED will blink “Blue” when the

device is trying to register with the IMS Core. This LED will blink “Red” if the back haul

bandwidth is not enough for calls.

ACTIVITY

POW LNK SYS NET GPS

Power on

Blue

Off

Blue

Flashing

Off Off

IP information

Complete

Blue

Flashing

Off Off

[LINK] Blue if physically connected. Additionally, it will blink per network activity.

IP Sec Tunnel

Connected

Blue Blue

Blue

Flashing

Blue Off

[NET] Red flashing until the eFemto gets the DHCP IP address. Blue flashing while IPSec tunnel is

being established, Red if waiting due to earlier failure in making the tunnel establishment

GPS Lock

Established

Blue Blue

Blue

Flashing

Blue Blue

[GPS] Red if there are not enough tracking satellites, Blue blinking with satellites but not yet locked,

and Blue if locked

System

Reboot

Blue Off Off Off Off

IMS/SIP

Registration &

Calibration

Blue Blue

Blue

Flashing

Blue Blue

[SYS] Blue flashing until SIP is registered for 1x and/or PDSN keep alive for DO, Red blinking if the

bandwidth is not enough for a call

Frequency Lock &

System Ready

Blue Blue Blue Blue Blue