Installation Guide

EdgePoint PRO Installation Guide
______________________________________________________________________________
AirWalk Proprietary and Confidential Page 6 of 19
3 eFemto Safety and Compliance Information
3.1 Statement of Intent
The AirWalk EdgePoint PRO Femto Cell is intended for use in a CDMA cellular infrastructure
radio access network. The responsible body shall be made aware that, if the equipment is
used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
3.2 Safety Precautions
Power Sources
Use only power sources that are within the specified limits as designated on the equipment
labels. Use of power sources outside the specified limits is hazardous and may cause
personal injury or property damage.
Equipment Location
Equipment is meant for indoor use only and should be located inside the building. Use of
unprotected equipment outdoors is hazardous and may cause personal injury or property
damage.
3.3 Regulatory Compliance Information
The FCC regulatory compliance information provided in this section is applicable only to
models equipped with an FCC Identification Number (FCC ID).
Enterprise Femtocell
MODEL: AWFExxxxxxx
FCC ID: R4HAWEPPRO
MAC ID:
76.0 mm
50.0 mm
DC IN: 12 VDC / 8A
AirWalk Communications., Inc Contact: [phone]
0009D200000
Made In U.S.A.
SERIAL #:
AA00000A
Figure 1 - AirWalk eFemto FCC Label (SAMPLE)