User's Manual

AW100 Series System Installation Manual
____________________________________________________________________________
_____________________________________________________________________________
AirWalk Proprietary and Confidential Page 19 of 54
Mechanical Specification
RF Input and Output
Connector
SMA Female (Input) N Female (Output)
AC Power Connector IEC
RU Control Connector RJ-45 Serial Interface
Weight 13 kg (28.55 lbs.) Per RU
Dimensions ( W x H x D )
482mm(W) x 457mm(D) x 88mm(H)
19”(H) x 18”(D) x 3.5”(H)
2 Rack Units
Table 3-2 Radio Unit Specifications (Slim RU Series)
3.4.3 Power Supply and Environment Technical Specification
AC Input Power Supply For AC Powered Models
Input Voltage: AC 100Volts ~ 250Volts
Input Frequency: 50Hz ~ 60Hz
AC Power Connector: IEC
Dissipated Power For AC Powered Models
AW100 Main Unit: 60 Watt Max (Efficiency 75%)
Radio Unit (Slim RU) 400 Watt Max (Efficiency 85%)
Maximum AW100 IP-BS 460 Watt Max (Main Unit & 1x Radio Unit)
Table 3-3 AC Power Supply Specifications
DC Input Power Supply For DC Powered Models (DC RPSU)
Input Voltage: DC 12 Volts ~ 30 Volts (float charge compatible)
Fuse Rating: 50A
DC Power Connector (DC
RPSU)
Bolted Bus Bar; 2 hole lugs; ¼” holes; ¾” spacing
(Use Blackburn CTL2-2516 or equivalent connector lug)
Dissipated Power For DC Powered Models
AW-100 Main Unit: 60 Watt Max
Radio Unit (Slim RU) 270 Watt Max
Maximum AW-100 IP-BS 330 Watt Max (Main Unit & 1x Radio Unit)
Table 3-4 DC Power Supply Specifications (DC RPSU)
Environment Specification
Operating Temperature -0
o
~ +50
o
C
Storage Temperature -30
o
~ +60
o
Relative Humidity 5% ~ 95% - Non-condensing
Noise Less than 60dBA, distance 1.5m
Airborne Particle
0 ~ 90 ㎍/㎥
Table 3-5 Environment Specifications