User's Manual
AW100 Series System Installation Manual
____________________________________________________________________________
_____________________________________________________________________________
AirWalk Proprietary and Confidential Page 36 of 54
10. Show RSSI2
11. Show TSSI
12. Show RSSI1PWR
13. Show RSSI2PWR
14. Show TSSIPWR
15. Show XCVR Temperature
16. Show XCVR Reset Reason
17. Show XCVR Cable Status
18. Show XCVR PLL LOCK
19. Show XCVR Power Status
20. Show TX Status
0. Exit
=====================================================
Step 3
Enter the following:
Select Input Number => 1
// choosing 1 will take you to the below menu.
ALPHA : xcvrChangeCh Num [001 ~ 1500] [1175] [/0:Exit]==>
Step 4
From the above menu, type the new channel desired (CDMA channels from 1 to 1500)
and 0 to exit.
Only standard CDMA channel numbers within the designated band capability of the radio
is accepted by the base station.
PS)
Step 5
CDMA Channel to CDMA Frequency Assignment Correspondence
Band CDMA Channel Number
Transmit Frequency Band (MHz)
(Base Station)
0
(800MHz)
1 ≤ N ≤ 799
880.02 ~ 893.37
991 ≤ N ≤ 1023
869.04 ~ 870.00
1
(1900MHz)
0 ≤ N ≤ 1199
1930.00 ~ 1989.95