User's Manual

AW100 Series System Installation Manual
____________________________________________________________________________
_____________________________________________________________________________
AirWalk Proprietary and Confidential Page 46 of 54
7.3.3 IP-RAN Initial Configuration (default “booting mode”)
Connection the PC to the RN using either the default factory IP address (new systems),
or the primary address or secondary address (systems already configured). The window
shown in Figure 7-2 will appear in the browser:
Figure 7-2 Web Server Login Screen
Enter the default login id and password to gain access to the configuration screen, which looks
similar to Figure 7-3.
Figure 7-3 IP-RAN Configuration Screen (default “booting mode”)
Enter the required information and click on “Submit and Reboot” to set the parameters. The
system will present the screen as shown in Figure 7-4. At this point, the system sets the
configuration parameter and then proceeds to reboot. During reboot, the iBSM contacts and
downloads the full site configuration. The reboot process can be interrupted by clicking on
“RECONNECT”.