User's Manual

AW100 Series System Installation Manual
____________________________________________________________________________
_____________________________________________________________________________
AirWalk Proprietary and Confidential Page 47 of 54
Figure 7-4 IP-RAN Configuration Screen (default “booting mode”)
7.3.4 IP-RAN Re-Configuration (“running mode”)
An IP-RAN equipped with an existing configuration can again be accessed via the Web
Server tool to change parameters. The connection to the IP-RAN must be made using
either the current primary IP address or the secondary address which is based on the
base station id. After connection, the login screen will appear as shown in Figure 7-5,
indicating “running mode”.
Figure 7-5 IP-RAN Re-Configuration Screen (“running mode”)
Enter the default login id and password to access the configuration screen: