Service manual

1-2
INTRODUCTION
SM SX DCI 1-A.3 GB
1.5 Control
The microprocessor indoor controller, and an infrared remote control, supplied as
standard, providing complete operating function and programming. For further details
please refer to the Operation Manual, Appendix A.
1.6 Outdoor Unit
The SX outdoor units can be installed as floor or wall mounted units by using a wall
supporting bracket. The metal sheets are protected by anti- corrosion paint work
allowing long life resistance. All outdoor units are pre-charged. For further information
please refer to the Product Data Sheet, Chapter 2.
It includes :
● Compressor mounted in a soundproofed compartment :
Single Rotary – for SX 9 DCI and SX 12 DCI.
Scroll – for SX 18 DCI.
Twin Rotary – for SX 24 DCI and SX 30 DCI.
● Axial fan.
● Outdoor coil with hydrophilic louver fins for RC units.
● Outlet air fan grill.
● Service valves” flare” type connection.
● Interconnecting wiring terminal block.
1.7 Tubing Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual, Chapter 10tttvv.
1.8 Accessories
RCW Wall Mounted Remove Control
The RCW remote control is mounted on the wall, and controls the unit either as an
infrared remote control or as a wired controller.The wired controller can control up to 10
indoor units with the same program settings and adjustment.
For further details please refer to the Technical Service Manual
1.9 Inbox Documentation
Each unit is supplied with its own installation and operation manuals.
CONTENT