Service manual

1-2
INTRODUCTION
SM HADDCI 1-A.2 GB
1.3 Indoor Unit
The indoor unit is a wall mounted type, and can be easily fitted to many types of residential
and commercials applications.
It includes:
● Casing with air inlet and outlet grills.
● A large-diameter tangential fan.
● Bended coil with treated aluminum fins.
● Motorized flaps.
● Variable Speed motor (PG).
● Advanced electronic control box assembly.
● Interconnecting wiring terminal block.
● Mounting plate
.
1.4 Filtration
The HAD series presents several types of air filters:
● Easily accessible, and re-usable pre-filters (mesh).
New special filter: Nm photo catalyst + biological anti bacterial.
•
1.5 Control
The microprocessor indoor controller, and an infrared remote control, supplied as
standard, provide complete operating function and programming. For further details
please refer to the Operation Manual, Appendix A.
1.6 Outdoor Unit
The HAD outdoor units can be installed as floor or wall mounted units by using a wall
supporting bracket. The metal sheets are protected by anti- corrosion paint work allowing
long life resistance. All outdoor units are pre-charged. For further information please
refer to the Product Data Sheet, Chapter 2.
It includes :
● Compressor mounted in a soundproofed compartment
Single DC Rotary => for GC 7 DCI, GC 9 DCI / GCD009, GC 12 DCI / GCD012
● Axial fan.
● Outdoor coil with hydrophilic louver fins.
● Outlet air fan grill.
● Outdoor advanced controller.
● 2 speed AC motor.
● Service valves “flare” type connection.
● Interconnecting wiring terminal block.
CONTENTS