USER MANUAL 15” Multi-Touch Panel PC IP15ID7T-C3-5RT Rev 1.
American Industrial Systems, Inc. http://www.aispro.
Table of Contents FCC rules: ..........................................................................................................................................................5 Important Recycle Instruction: .........................................................................................................................5 Usage Notice.....................................................................................................................................................
Environmental Requirements.................................................................................................................12 General....................................................................................................................................................13 Approvals ................................................................................................................................................13 Display type...........................................
Copyright: The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright © 2013 American Industrial Systems. All rights are reserved. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission.
Usage Notice ! Warning! To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Do not open or disassemble the product as this may cause electrical shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: • • • • Turn off the product before cleaning.
Introduction Applications: Quick solution for: • Building automation • Access control • Room Information Display About IP15ID7T-C3-5RT IP = Industrial Panel 15 = 15 Diagonal viewing area in inches ID3S = Intel Atom duel core 5RT = 5 wire Resistive Touch Integrated possibilities: Automation and Security for Home and Building HVAC environmental control Factory automation Industrial HMI and SCADA Self Service Kiosk in Hotels Hospitals, airports, and Ticket vending Vehicle mounted Equipment and device control
Back Panel I/O Port 1 x Power Jack 1 x Keyboard, 1 x Mouse PS2 types 2 x RJ-45 (LAN) 2 x RS-232 only (Com3 and 4) Note# COM2 is optional 1 x RS-232/422/485 (Com 1 configurable) 1 x VGA 4 x USB 2.0 1 x DVI (optional) 1ea.
Reset button Power on LED Hard drive activity LED Brightness control Side View Top Edge Speaker ports IP15ID7T-C3-5RT User Guide - American Industrial Systems Page 9
Ethernet interface The Motherboard is equipped with Broadcom BCM57780 chipset which is fully compliant with the PCI 10/100/1000 Mbps Ethernet protocol compatible. It is supported by major network operating systems. The Ethernet ports provide two standard RJ-45 jacks.
VGA port for 2nd industrial monitor DVI (optional) Extended monitor support: • Add camera to watch for deliveries from you work space • Add machine vision inspection to the machine process • Use of the Panel PC without blocking the view of critical Gages • Add remote viewing outside the control room • Locate the second display closer to the action • Room Information Display Mother Board Product Overview Processor The panel PC is integrated with Intel® NM10 express chipset and Atom D2550 - 1.
BIOS AMI BIOs (detailed instructions exist on the CD shipped with the panel) Just after power on, pressing the Del key will open the BIOs configuration application. Main Memory 2GB DDR3 800/1066 MHz, up to 4GB Chipset Intel® NM10 express chipset Storage Device 160GB Hard Disk Drive Dimensions ~400 x 320 x 79.
General Input Power 12 Terminal Block (Phoenix Type) MTBF 50,000 Hours Demonstrated Approvals Designed for CE/FCC Display type 15” diagonal, Active matrix TFT LCD Antiglare Frame Rate average 60 Hz Aspect Ratio 4:3 (Widescreen) Active/Area 304.1 (H) x 228.1 (V) mm Native (Optimal) Resolution 1024 x 768 XGA Number of Colors 16.
Viewing Angle Horizontal: 140° Total Vertical: 120° Total Features and Benefits ▪ Flexible, reliable, and ruggedized for open platform HMI/SCADA ▪ Windows-based, integrated CPU, RAM, data storage, USB, RS232, RS422/485 and Ethernet ports ▪ All steel construction designed for harsh and industrial environments ▪ Supports Panel, Wall, and VESA arm mounting ▪ Technical support for drivers, hardware, including troubleshooting procedures and system issues ▪ Customer service and sales support for product selectio
Package Content Driver CD for touch screen and other features Recovery CD for restoring back to factory condition Paper back recovery manual IP15ID7T-C3-5RT User Guide - American Industrial Systems Page 15
12 VDC Power supply Minimum power requirement is 24 watts Standard AC Power cord American 3 Prong Phoenix to power supply prewired This connector has adhesive as a strain relief. Wire for screw connectors This is used when installed in an environment that already has 12 volts available. A second phoenix connector is supplied without adhesive.
Product Dimension IP15ID7T-C3-5RT User Guide - American Industrial Systems Page 17