User's Manual

KDC User Manual
40
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
start position and number of characters to be stored and/or transferred.
o Select the x characters from y position
- Set Partial Data Start Position to y , Partial Data Length to x, Partial
Data Action to Select
- Partial Data Length 0 means to select all characters from y position.
o Erase the x characters from y position
- Set Partial Data Start Position to y , Partial Data Length to x, Partial
Data Action to Erase
- Partial Data Length 0 means to erase all characters from y position.
Handshake - KDC provides Handshake mode when Data Format is set to Packet Data.
 Handshake Mode will increase the reliability of barcode data transmission.
 The default mode for Handshake is Disabled.
 Data transmission speed is slower when Handshake Mode is Enabled.
Terminator – KDC supports various termination characters when the Data Format mode
is set to Barcode Only. This option allows you to select <NONE>, <CR>, <LF>,
<CR+LF>, or <TAB> as the termination character. The default terminator is <CR+LF>.
Up/Down/Left/Right arrow terminator is also available for HID mode.
Chk Duplicate – This option allows you to prevent collecting duplicated data.
3.3.5 BT Config Menu
The KDC supports Bluetooth Ver2.1+EDR. Before utilizing the advantages of Bluetooth
functionality with the KDC, you should become familiar with Bluetooth connectivity and
its impact on your host environment.
To configure your KDC for Bluetooth functionality, you must use the KDC Menus. To
access the menus, simultaneously press the UP and DOWN buttons on the side of the
KDC. Use the DOWN button to scroll to Bluetooth then press SCAN button.
Below is a listing of the Bluetooth options and their settings. The default settings for
these options have been set to increase the usability of Bluetooth technology without
compromising the KDC battery usage.
IMPORTANT: We strongly recommend NOT changing these settings until you have fully
tested the Bluetooth connection between the KDC and the host device.