User's Manual

KDC User Manual
42
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
- KDC exits pairing mode either by pressing SCAN button or it fails to pair
with Bluetooth host device in 90 seconds.
 Discovering: Search neighborhood Bluetooth devices
 Connecting To: Inquiry to registered Bluetooth devices
 HID Sync: KDC transmits all stored data to the host over HID profile if HID
Sync option is enabled
3.3.7 System Menu
 Memory Size (3.0 version only)
 User can select normal data and application database memory partition size.
 KDC will erase all stored data upon changing the partition size.
 User should enter the following key sequence to change the partition.
 UP button + UP button + DOWN button + DOWN button + SCAN button
 Memory Status: Checks the number of stored barcodes and memory usage.
 Reset Memory: Resets KDC memory by erasing all stored barcodes, application
and BT registry.
 Auto Erase: Erases all stored barcodes upon reaching buffer full condition if
Enabled is selected
 Sleep Timeout: Sets amount of time KDC waits, when not being used, before
going to sleep.
 Date/Time: Sets the date and time of KDC which can also be set using KTSync
®
 Battery: Shows current status of battery power level.
 Version: Shows KDC firmware version and serial number.
 Button Lock: Locks or unlocks KDC scan and scroll buttons.
 Beep Alert
 Beep Sound: Enables or disables KDC beep sound.
 Power On Beep: Enables or disables beep sound when KDC power is on.
 Beep On Connect: Enables or disables beep sound when KDC is connected to
host.
 Beep On Scan: Enables or disables beep sound when KDC is scanning.
 Beep Volume: High or low.
 MFi Mode (KDC20i): Enables or disables MFi mode. MFi mode supports SPP and
iPhone Bluetooth profiles. Non-MFi mode supports SPP, SPP2.0, HID iOS and HID
normal.
 Vibrator: Enables or disables KDC vibrator.
 Auto Exit: Enables KDC to automatically exit KDC Menus.
 Port Status: Enables or disables KDC port messages.
 Display Format: Selection of display format - Time & Battery, Type & Time, Type &
Battery, Memory Status and Barcode only
 Scrolling : Enables or disables display scrolling for a barcode with more than 40