User's Manual

KDC User Manual

Revision 3.05.R6

4. BLUETOOTH

The KDC20 support HID (Human Interface Device) normal, HID iOS, SPP (Serial Port

Profile) and SPP2.0 profiles. KDC20i support SPP and iPhone (Made for iPhone) profiles.

They are compatible with the following Bluetooth stacks.

 BlueSoleil

 Broadcom (Widcomm)

 Microsoft Windows XP, Vista, 7, and Mobile5.0+

 Toshiba

KDC20 can configure Bluetooth options using PC KTSync and special barcodes.

Bluetooth Config 4.1

4.1.1 ConnectDevice

KDC supports both Serial Port Profile (SPP) and Human Interface Device Profile (HID). User

can choose SPP2.0, SPP (2.1), HID normal, HID iOS profiles to communicate with the host

device. Additional iPhone (Made for iPhone) option is available for KDC20i.

User can connect and disconnect Bluetooth connection with the host device by pressing

UP and DOWN buttons if BT Toggle option in BT Config menu is enabled. It normally

takes 3 seconds to connect and 1 second to disconnect. This is a very useful feature for

iPhone and iPad application.

User can also enable and disable iPhone and iPad soft key instantly using this BT Toggle

option.

UP button shows Bluetooth connection status and DOWN button shows time if KDC is

connected using SPP profile.

Note:

User should unpair the KDC first from the Bluetooth host to change the

Connect Device setting on the scanner to other Bluetooth profile.