User's Manual

KDC User Manual

Revision 3.05.R6

4.1.6 Auto Power Off

The Auto Power Off option works in conjunction with the PWR Off Time option. This

option allows the KDC to power off Bluetooth automatically when the KDC is NOT

CONNECTED to the host for the time duration specified in the PWR Off Time option.

The default for this option is Disabled. It is strongly recommended to keep it enabled to

maximize the operation time of the KDC. If Auto Power Off is enabled, Bluetooth can be

manually powered off before specified time in PWR Off Time option.

4.1.7 Beep Warning

The KDC beeps to acknowledge the status of the Bluetooth connection as follows:

1. One high short beep when Bluetooth is connected.

2. One low short when Bluetooth is disconnected.

3. Five short beeps if:

 “Beep Warning is ENABLED”

 “Auto Power Off is DISABLED”

 “KDC20 is DISCONNECTED from HOST”

 “Bluetooth power is ON”

4.1.8 PWR OFF Time

The PWR Off Time option works in conjunction with the Auto Power Off option. If Auto

Power Off is Enabled, the KDC powers off Bluetooth when the time duration specified in

the PWR Off Time option is met and the KDC is NOT CONNECTED to the host. The

time setting for this option is from one (1) minute to 30 minutes. The default is five (5)

minutes.

4.1.9 PowerOFF Msg

KDC sends Bluetooth power off message “BTOFF” to the host if PowerOFF message

option is enabled.

4.1.10 MAC Address

User can verify KDC Bluetooth MAC Address.

4.1.11 FW Version

User can verify KDC Bluetooth firmware version in BT FW menu.